| Analog Input |
| Input Channels |
6 (Differential) |
| Input Type (Jumper Selectable) |
+/-500 mV, +/-1V, +/-5 V, +/-10 V |
| +0 mA ~ +20 mA, +/-20 mA, 4 ~ 20 mA |
| Resolution |
16-bit |
| Sampling Rate |
10 Samples/Sec. |
| Accuracy |
+/-0.1% |
| Zero Drift |
+/-20 uV/°C |
| Span Drift |
+/-25 ppm/°C |
| Overvoltage Protection |
240 Vrms |
| Input Impedance |
2M Ω |
| Common Mode Rejection |
86 dB Min. |
| Normal Mode Rejection |
100 dB |
| Individual Channel Configuration |
Yes |
| Analog Output |
| Output Channels |
2 |
| Output Type (jumper selectable) |
+0 V~ +5 V, +/-5 V, +0 V~ +10 V,+/-10 V |
| +0 mA ~ +20 mA, +4 mA ~ +20 mA |
| Individual Channel Configuration |
Yes |
| Resolution |
12-bit |
| Accuracy |
+/-0.1% of FSR |
| Voltage Output Capability |
10 V@20 mA |
| Current Load Resistance |
500 Ω |
| Open Wire Detection |
Yes, for 4 ~ 20mA only |
| Digital Input |
| Input Channels |
2 |
| Dry Contact (Source) |
On Voltage Level |
Close to GND |
| Off Voltage Level |
Open |
| Effective Distance for Dry Contact |
500M Max. |
| Wet contact |
On Voltage Level |
+1 VDC Max. |
| Off Voltage Level |
+3.5 VDC ~ +30 VDC |
| Counters |
Channels |
2 |
| Max. Counts |
16-bit (65535) |
| Max. Input Frequency |
50 Hz |
| Min. Pulse Width |
10 ms |
| Overvoltage Protection |
30 VDC |
| Digital Output |
| Output Channels |
2 |
| Output Type |
Isolated Open Collector (Sink) |
| Max Load Current |
700 mA/Channel |
| Load Voltage |
+5 VDC ~ +50 VDC |
| Overvoltage Protection |
60 VDC |
| Overload Protection |
1.4 A |
| Short-circuit Protection |
Yes |
| System |
| CPU |
16-bit CPU |
| SRAM |
512 KB |
| Flash Memory |
512 KB |
| EEPROM |
16 KB |
| Watchdog |
Yes |
| Communication |
| PoE Ethernet Port |
10 / 100 Base-TX and automatic MDI/MDI-X |
| 2 Way Isolation |
| I/O |
2500 VDC |
| EMS Protection |
| ESD (IEC 61000-4-2) |
4 kV Contact for each terminal and 8 kV Air for random point |
| EFT (IEC 61000-4-4) |
+/-4 kV for Power |
| LED Display |
| PoE |
PoE On |
| L1 |
System Running |
| L2 |
Ethernet Link/Act |
| L3 |
Ethernet 10/100M Speed |
| Power Requirements |
| Reserve Polarity Protection |
Yes |
| Powered from terminal block |
Yes, 12 ~ 48 VDC |
| Powered from PoE |
Yes, IEEE 802.3af, Class1 |
| Consumption |
4.2 W |
| Mechanical |
| Dimensions (W x H x D) |
72 mm x 123 mm x 35 mm |
| Installation |
DIN-Rail or Wall mounting |
| Environment |
| Operating Temperature |
-25 ~ +75 °C |
| Storage Temperature |
-30 ~ +80 °C |
| Relative Humidity |
10 ~ 90% RH, non-condensing |
