PIO-D48U

Support the +3.3/+5 V PCI bus for PIO-D48U
48 channels of digital I/O
Bi-direction programmable I/O ports under software control
All I/O lines buffered on the board
Six 8-bit bi-direction I/O ports
SMD, short card
Connects directly to DB-24PR, DB-24PD, DB-24RD, DB-24PRD, DB-16P8R,
DB-24POR, DB-24SSR, DB-24C or any OPTO-22 Compatible daughter boards.
One 32-bit programmable internal timer
One DB37 connector, one 50-pin box header
One 16-bit event counter
Interrupt source: 4-channel
Card ID function for PIO-D48U
Pull-up or pull-down resistors on I/O lines
Emulate two industrial-standard 8255 PPI ports (mode 0)
Buffer output for higher driving capability
DIO response time is about 0.77 μs (1.3 MHz max.)

PIO-D48U CR

Universal PCI, 48-channel DIO board (RoHS)

CA-3710	DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°))
CA-3710D	DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°))
CA-3710DM	DB-37 Male-Male Cable, 1.0 M, 180°. (RoHS)
CA-3730DM	DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS)
CA-3750DM	DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)
CA-4002	37-pin Male D-sub connector with plastic cover.
CA-5002	50-pin flat cable 20 cm
CA-5015	50-pin flat cable 1.5 M
ADP-37/PCI	50-pin connector extender to 37-pin connector
DB-24P	24-channel isolated D/I board
DB-24R	24-channel relay board
DB-24PR	24-channel power relay board
DB-24POR	24-channel of PhotoMos Relay output board
DB-24SSR	24-channel of Solid State Relay output board
DB-24C	24-channel of open-collector output board