• 28Wh or 56Wh, for more than 140 minutes operation time (dependent on panel PC power requirements)

• Rugged metal enclosure for standard VESA 75/100 mounting

• Web-based, remote network management, no software installation required

• Local PC-based monitoring software for input detection and battery status monitoring

• Auto shut down when battery low

• Remote DC output ON/OFF switch for external switch installation

• Provides stable power to the PC during line sags and spikes and absorbs power surges and transients,protecting expensive equipment

Input Input voltage Uinated/range DC +12V~+36V Input current rated 1. Adapter is 12V--9A (Load is 100W) 2. Battery is 12V--9A (Load is 100W) Standby power consumption 0.3A (0.2A if Network Management disabled) Operation with charging current 500mA Operation with charging power consumption 10W Charging time with system ON/OFF 8hrs / 2hrs (Battery empty) Output Output voltage for normal operation DC +12V +/-5% Output voltage for battery operation, approx. 12~16.8V DC 12V (exhaustive discharge protection) output current 0A~8.3A Efficiency(nominal operation)/power lossat Vin=12V, Iout=80% of full loading 94% Protection short-circuit protection Yes Exhaustive discharge protection 1.Battery low is 10% of Battery capacity 2.Shuntdown 5% of Battery capacity (Default) 3.The end of Battery discharge voltage is 6V EMC / Safety certification UL, TUV. CE, FCC Weight 1.8kg Storage Temperature -20C~50C Operation Temperature 0C~40C Dimensions 174mm(L) * 147mm(W)*35mm(H) LED Indicator Green - DC power input  Yellow - Battery charging  Orange - Bettery discharging Monitoring Ethernet interface Web-based, specification 10/100Mbps with RJ-45 connection, Cat. 5 cable USB interface PC-capable, specification 2.0 with full speed, i.e. 2 Mbit/s. Standard 4-core shielded cable, USB Series "mini B"connector to DC-UPS Battery Battery Model Name BAT-LI-2S2P3800 battery type Li-Ion 2S2P 7.4V Battery capacity 8.4V The end of discharging voltage 5.6V Suggestive charging current (Max.) 2A System continuous discharging current(Max) 7.6A The end of charge condition 250mA/1Min Discharge protection Under Voltage Protection / Over Current Protection Charge protection Over Voltage Protection / Over Current Protection Ambient temp 0C~40C Storage Tem -20C~60C Self-discharge rate 340uA~440uA Dimensions 139mm(L) * 47mm(W)*26mm(H) Weight 236g Cycle life 300 charge/discharge cycles Backup 60W/10Min Safety class CE,UL,TUV

产品名称 描述 AUPS-B20-R10 VESA 100, DC 9~36V input, 12V output 100W UPS module with 3800mAH, 2S4P Li-Ion battery BAT-LI-4S2P3800 SMART BATTERY;TE9IC042K1002 ;Lithium ion Battery(4S2P); 14.8V;3800mAh;RoHS

1 * DC power cable,150mm. mini Din 4 pin male to DC plug 5.0x2.1(P/N:32000-115400-RS) 1 * DC power cable, 150mm, DC plug 5.5x2.1 to DC plug 5.0x2.5 without lock (P/N: 32000-120400-RS) 1 * DC power cable, 150mm, DC plug 5.5x2.1 to DC plug 5.0x2.5 with lock (P/N:32000-115300-RS) 1 * USB cable, 200mm, USB type A male to mini USB (P/N: 32000-115500-RS) 1 * Remote switch cable, 1200mm (P/N:32000-115600-RS) 1 * Screws kit (P/N:44013-030041-RS) 1 * Utility CD (including utility software and user's guide, P/N: 7B000-000087-RS)